The Point Of No Return (DS23G) Mac OS

Posted on 6/4/2021 by admin

It’s been a long time since my last pizzabox post - over a year! There’s been a lot going on in my life but I’m excited that lately I’ve had a lot more free time, which means more time to explore the world of workstations and share with you!

The Point Of No Return (ds23g) Mac Os Update
The Point Of No Return (ds23g) Mac Os Catalina
The Point Of No Return (ds23g) Mac Os Download

The Point of No Return v0.13 DS23Games Overview: The Point of No Return“ is the story of Jennifer Turner, a mid-30's woman with a loving husband and a soon to be college bound daughter. Her idyllic smalltown existence is threatened when three fugitives decide to turn her home into a temporary hideout. By now you have probably heard that Mac OS rumors (MOSR) was forced to pull two articles about a new Power Mac. Ever since then 'crossing the Rubicon' has meant going beyond a point of no return.

Download The Point of No Return by My Name is Ian in high-resolution audio at ProStudioMasters.com - Available in 44.1 kHz / 24-bit AIFF, FLAC audio formats. Planet's Edge: The Point of no Return Description When the alien craft entered Earth’s solar system, the human race was alive with excitement. I'm trying to keep writing but I have no real drive. I produced for 8 years as Quarl but when my computer blew last August my motivation to write music kind of died with it. All my files are on an external HD but its Mac OS data so Windows can't read any of it. Computer I'm currently borrowing has no processing power and a lame sound card.

I’m also excited announce that I’m trying out YouTube videos - not instead of these posts, but in addition to them. This post has a sibling video, so if that’s more your jam, check it out.

This post is part one of a multi-part series about running NeXTstep on the HP 712. Today I’ll dive in to installation process. Paint.ball mac os.

NeXTstep is a historically interesting OS (more on that in a bit) and while I do own some original NeXT hardware, it’s a difficult to actually use - one of my longer-term projects is to make adapters for the NeXTstation to use more common input devices. That doesn’t stop me from playing with NeXTstep, though, because it also runs on one of my favorite pizzaboxes, the HP 712.

A note on cAPitALIZAtion

NeXT used a variety of capitalizations of NeXTstep, including

NeXTSTEP
NEXTSTEP
NeXTStep, and
NeXTstep

Regardless of historical accuracy, I think “NeXTstep” looks the coolest, so I’m going to use that throughout

The NeXTstep in computer evolution

The OS I’m installing is NeXT, inc’s NeXTstep. NeXTstep was made up of:

the Mach kernel
a Unix-like user-land from BSD

Those components make it sound like “yet another boring 1980s-1990s commercial Unix”. However, the NeXT few layers (NO APOLOGIES FOR PUNS) made it quite different from other Workstation OSes. It had:

NeXT’s Objective-C runtime for building applications (an ancestor of Cocoa)
the Display PostScript graphics engine
an incredible GUI built on top of them

I’ll dive deeper in to what features made NeXTstep special in a future post, but suffice to say: NeXTstep was incredibly important for the future of operating systems. While NeXT themselves didn’t have much success selling their workstations (or their OS…or their toolkits…), their work directly forms the basis of MacOS X and indirectly influenced the development of other OSes.

In the mid 1990s, NeXT’s effort to replace their Motorola 68000-based workstation architecture with a RISC one fizzled out. When they stopped selling hardware, they started selling new ports of NeXTstep for other architectures: Intel’s IA-32, Sun’s SPARC, and HP’s PA-RISC. The version I’m installing is NeXTstep 3.3 - the first and final version for PA-RISC.

This pizzabox Hewlett-Packs a punch!

The hardware I’m using is the HP 9000 Model 712. I’ve written about setting it up to use its native HP-UX OS, but that’s not the only trick up its sleeve. The 32-bit first-generation PA-RISC machines in HP’s 9000 family can run NeXTstep and are much faster than NeXT’s 68000 hardware. The 712 is a later model from that generation, packaging the power of earlier models in to a less expensive and smaller package.

Important things to know about my 712 are that it has:

64MB of RAM (midway between the min of 16MB and max 128MB)
a 60 MHz processor (later models being 80 or 100 MHz)
a VRAM expansion (so it supports all relevant resolutions)
no hard disk (or at least, it didn’t ship with one, though it supports one)
also no floppy disk drive, though it also can (I’m guessing this means it was netbooted in its former life?)
IBM PC-style I/O: video comes via a VGA port, and peripherals are the PS/2 type

Besides the computer, the other ingredients I’ll need are:

a hard disk - as usual, I’ll be using a SCSI2SD, but as you’ll see in a bit, the configuration is a bit non-standard
installation CD - I got mine from the Internet Archive
a CD-ROM drive - at first I tried to use my physical drive, but it seems to be broken. I ended up using the SCSI2SD as a CD-ROM as well.

Disk configuration mis-STEPs

Approaching this naively, I’d expect the SCSI2SD’s default settings to work. Out of the box, it’s configured to have SCSI ID 0 be a 2GB hard disk - nothing fancy. I tried this, and the installation seems like it’s going to work, but when it comes time to format the disk, it runs in to problems:

Digging around on the internet a bit gave me a clue - NeXTstep is picky about drive geometry. Some fine folks on the “NeXT Computers” forum geometry settings that will work with NeXTstep on a SCSI2SD. Unfortunately, the scsi2sd-util software doesn’t have a way to set the important sectorsPerTrack and headsPerCylinder. Instead, I had to save the configuration to an XML file, open it up and edit those settings, and re-import the config in the utility. The offending default geometry settings were:

I changed them to the recommended settings from the forum:

This is good enough to get all the way through the install and software installation process, but it will just hang on the first true post-installation boot:

There’s a lot going on here, and it doesn’t explicitly tell you what’s going on, but there are clues. The first interesting bit is:

In a typical Unix boot sequence, the root filesystem is first mounted read-only, checked with fsck, then re-mounted read-write. It sounds like that re-mount didn’t work! There’s more indication that the root is still read-only further down when it attempts to start syslogd:

So, it seems like I’m having trouble with /dev/sd0a, the root partition. In a normal world, I’d expect that that corresponds to:

the first partition (the a)
on the first disk (the 0)
attached to the SCSI bus (the sd)

Given that I have my hard disk at SCSI ID 0 and CD-ROM at ID 3, you’d think that sd0a would be the hard disk. You would be wrong. If you read a little higher in this boot output, it says:

Excuse me? sd0 is SCSI ID 3? That’s…my CD-ROM drive. I guess it makes sense that it can’t be mounted read/write?! It took some digging, but I found an explanation as to why from an unlikely source - a NeXT knowledge-base article from 1997! NeXTAnswers #1684 explains:

Q: How are SCSI device numbers assigned on HP hardware?

A: Unlike NEXTSTEP on NeXT and Intel-based hardware, NEXTSTEP for PA-RISC assigns SCSI device numbers in order of decreasing SCSI ID numbers. In other words, NEXTSTEP scans down by SCSI ID, assigning device number 0 to the first device encountered, device number 1 to the second, etc.

For example, a typical HP SCSI setup consists of a hard disk at SCSI ID 6 and a CD-ROM drive at SCSI ID 2. In this example, the hard disk is assigned SCSI device number 0, while the CD-ROM drive is assigned device number 1. A second hard disk added at ID 1 would then be assigned device number 2.

Well that seems unusual! Why would NeXT number differently on PA-RISC than other platforms? It turns out…this is how HP does it. In the Owner’s Guide for the HP 712 on page C-13 it has a table to help you choose SCSI IDs, and it notes that your internal hard drive would normally be ID 6 (the “Winchester Disk”). On page 6-2 (the beginning of the section about CD-ROM drives) it notes:

The instructions in this chapter assume that your CD-ROM drive is set to the factory default address of SCSI ID 2.

The boot disk being SCSI ID 6 and an external CD-ROM being ID 2 is not what I would typically expect. On a Mac (at least!), it’s traditional to have the internal boot drive be ID 0 and a CD-ROM be ID 3. I can’t say I know why HP numbers things differently from other manufacturers, but…it seems that they do.

To bring this back around: what’s happening here is the bootloader is starting up the kernel from the drive it’s on, then telling it to proceed to mount /dev/sd0a as root. Because my IDs are set in a “typical” fashion, that results in it trying to mount the CD-ROM as root instead of the boot disk. Renumbering my SCSI drives to have the disk at a higher ID than the CD-ROM fixes the problem.

My final SCSI2SD configuration had the hard disk at ID 6, and the CD-ROM drive at ID 3.

Finally doing the install

Now that we know that:

NeXTstep is picky about disk geometry
HP workstations are picky about about SCSI ID ordering

and have the SCSI2SD set up correctly, it’s time to actually start the installation! Booting from the CD-ROM brings up the NeXTstep bootloader, a language choice screen, and the installation main menu. Once I give my consent for beginning the installation, it goes through what looks like a pretty normal Unix boot.

Once the system is up, the installer shows which disk it thinks it should install to. If I accept that choice of target disk, the installer gives me one last change to opt-out before the point of no return.

As the main-menu warning indicates, the installer will entirely take over your hard disk. There are some notes online about it just being generally impossible to construct a disk with an HP-UX and NeXTstep partitions. I suspect that’s why NeXTstep uses a bootloader, rather than passing kernel parameters from the firmware prompt like most of its contemporary workstations - the firmware isn’t capable of reading deeply enough in to the disk.

First the disk needs to be “prepared” - I’m assuming that behind the scenes it’s writing a partition table and formatting the disk. Then, files are copied from the CD-ROM. The formatting takes about 5 minutes; the copying takes about 12 minutes.

After the copying stage, it’s time to reboot from the the hard disk for software installation. This time, it’s not in text mode anymore! My HP 712 isn’t currently connected to a network, so the networking part of the boot process complains. A quick “Control-C” nudges the process alaong.

The first graphical step is to configure hardware. Since NeXT knows exactly which components are in this workstation (since it’s a specific HP model, instead of an arbitrary PC), I can just proceed with the defaults. After configuration, I get to select software I want to install (on top of the base system). The options are:

non-English language support (Swedish, Spanish, Italian, German, and French)
documentation and on-line help (which sound an awful lot like they’re the same thing)
demo programs, the Webster English Dictionary program, and the dictionary’s supporting images
PPDs (Postscript Printer Descriptions) for various printers and imagesetters (for serious publishing)
emacs and TeX (for serious nerdery)

I’m going to install everything - the process takes about 35 minutes.

After a post-installation reboot, I get a chance to select which language to use. Folks who’ve installed Mac OS X may find this screen rather familiar:

and that’s it! I’ve successfully installed NeXTstep 3.3 on an HP PA-RISC workstation and I get my reward: the NeXTstep desktop.

What’s the NeXT step? (SEE WHAT I DID THERE?!?!)

This post is only the first part of my NeXTstep on PA-RISC project. I’m planning on there at least being a Part 2 on setting up networking and finding and installing useful software (like the developer tools!) and a Part 3 of reflections on the experience, its similarity to (and differences from!) the modern Mac OS. Further in the future, I’d love to do a Part 4 about developing a full application on NeXTstep.

This is the part where you come in - do you have any stories about using NeXTstep? I’d love for you to send them to me via email to sophie@pizzabox.computer! Also, please let me know if you’d be willing for me to include quotes from your stories in part 3 of this series (and how you’d like to be cited).

You must be 18+ to view this content

The Point of No Return may contain content you must be 18+ to view.

Are you 18 years of age or older?

Here is update 0.14 for The Point of No Return. This update adds 957 new renders to the game, concluding the first in-game day. At the end of it, the nature of the three routes Jennifer can take become alot more clear.